From: selvaraj subramanian ([email protected])
Date: Thu May 10 2001 - 23:17:08 PDT
Hello all,
My simulations using XTK for most of the daisy chain topology is showing non-monotonicity on both the edges of the data/signal. I tried different termination strategies to remove the kink. But couln't.
What I saw was that the worst affected load is the first load from the driver?
Suggest me how to remove the non-monotonicity while using the daisy chain topology and is it ok if I bring that kink within the threshold levels.
thanks in advance.
regards,
Selva
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:55 PDT