From: Shoaib ([email protected])
Date: Tue May 08 2001 - 04:52:32 PDT
Hi,
We have a testing board of Philips USB2.0 running at 480Mhz with a USB upstream connector connected to the output differential pair, we need to connect a usb downstream connector on the same differential pair. What i need to know is that if i connect both connector in parrallel what will happen, will it work or do i need to add some terminations,etc?? differential pair has to maintain a defferential Xtic impedance of 90ohm, Board is a four layer board, differential pair is routed on the top layer and upstream connecter is also located at the top, we intend to connect the downstream connector on the bottom side of the board right beneath the upstream connector. Moreover can anyone briefly describe the construction of usb hubs.
Thanx
Shoaib
AND-OR LOGIC Inc.
Pakistan
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:51 PDT