[SI-LIST] : maximum current for a 1/10Watt , 0 ohm jumper?

About this list Date view Thread view Subject view Author view

From: L· (John@quantatw.com)
Date: Wed May 02 2001 - 08:02:47 PDT


Hi All,
 
I saw some people use one 0 ohms 0.1W 0603 resistor as jumper to connect 5V
to chip's power pin. Is it a proper way? What is the disadvantage? What
will be the maximum current allowed for the resistor? Since the resistor
value is very small, does it mean a large current is allowed to flow through
the resistor to cross the 0.1w limitation?
 
Appreciate your comments..

John Lin
Senior SI Engineer, Server Team, ARD4
Quanta Computer Inc.,Taiwan, R.O.C.
Email: John@quantatw.com
Tel: 886+3+3979000 ext. 5183

 

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:48 PDT