Re: [SI-LIST] : Standard tolerance for 1.8V supplies

About this list Date view Thread view Subject view Author view

From: D. C. Sessions ([email protected])
Date: Tue Apr 24 2001 - 11:02:32 PDT


On Monday 23 April 2001 10:19, Khalid Ansari wrote:
> Hi all,
>
> What is the standard practice in the industry for tolerance on 1.8V
> supply voltages. Does + 5% work or does it need to be pushed
> out further. I need this information in regards to some testing that
> I am currently doing.

The official range is 1.65 to 1.95 volts.
(The rounding on 5% is getting silly.)

-- 
| The race is not always to the swift, nor the battle to the strong. |
| Because the slow, feeble old codgers like me cheat.                |
+--------------- D. C. Sessions <[email protected]> --------------+

**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu ****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:42 PDT