[SI-LIST] : Chassis Ground to Digital Ground

About this list Date view Thread view Subject view Author view

From: Gerald Aska (gerald@internetphotonics.com)
Date: Tue Apr 24 2001 - 10:42:28 PDT


All:

I am currently designing a power supply that operates from a -48V feed. It
was recommended that the top layer (of a 4 layer board) be connected to
chassis ground. The connection will be made by having all mounting holes
connect to chassis ground through mounting screws.

My question is: How do I connect the digital ground to frame ground?

Thanks
Gerald

#########################################
# #
# Gerald Aska #
# Internet Photonics, Inc. #
# 1030 Broad St., 2nd Floor #
# Shrewsbury, NJ 07702 #
# #
# Tel#: 732-389-1160 x144 #
# Fax#: 732-389-4394 #
# Email: gerald@internetphotonics.com #
# #
#########################################

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:42 PDT