From: Ray Anderson (Raymond.Anderson@Sun.COM)
Date: Thu Apr 19 2001 - 11:57:23 PDT
We were using the tee for tests just on the PLL section of a system
so 500 mA capability worked OK.
For a whole system board you will need to either search further
or build your own with a beefier inductor.
(the devil's in the details....)
>A follow up question please:
>Ray Anderson wrote: "Feed the DC power to your system through the tee's RF
>choke." The bias tees are capable of passing 500 ma at the most, my board
>under test requires over 10 amps. How is raw DC power connected to the board?
**** To unsubscribe from si-list or si-list-digest: send e-mail to
email@example.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:40 PDT