From: Farrokh Mottahedin ([email protected])
Date: Wed Apr 18 2001 - 14:56:48 PDT
Dear Mr. Anderson,
Would you be willing to share the vendor name and part number of the
broadband bias tee mentioned in your reply below.
> From: Ray Anderson [SMTP:[email protected]]
> Sent: Monday, April 16, 2001 3:34 PM
> To: [email protected]
> Subject: Re: [SI-LIST] : Methods to introduce noise in power planes
> Although there are several ways of doing this, one method which we
> use in our lab and have had really good results with is to utilize
> a commercial broadband bias tee to inject the noise.
> Feed the DC power to your system through the tee's RF choke. Inject
> your desired noise into the system via the capacitively coupled port.
> We've also tried building up ferrite transformers etc. to try to
> match the 'noise' to the ultra low impedance of the boards power
> distribution system but found the bias tee method works much better.
> Ray Anderson
> Sun Microsystems Inc.
Farrokh Mottahedin, Cisco Systems, Inc.
Gigabit Systems Business Unit GSBU
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected] In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:39 PDT