Re: [SI-LIST] : Under shoots and over shoots

About this list Date view Thread view Subject view Author view

From: selvaraj subramanian (selvaraj.manian@wipro.com)
Date: Mon Apr 16 2001 - 20:38:49 PDT


Hi,

The datasheets of the concerned CMOS devices will give the overshoot and
undershoot values. You can go through the TI website for more information on
this.

regards,
Selva

----- Original Message -----
From: <nivethavenkat@yahoo.co.in>
To: <si-list@silab.eng.sun.com>
Sent: Monday, April 16, 2001 1:10 PM
Subject: [SI-LIST] : Under shoots and over shoots

> Dear All,
>
> I am a new member of this group. It would be grateful
> if I get reply for my query below.
>
> Is there any standard document for the over shoots and
> under shoots on signal lines for CMOS devices.
> What is the allowable range of over-under shoots for
> 5V and 3.3V signal lines.
>
> Awaiting for replies.
>
> thanks & regards
> Nivetha Venkat
>
>
>
>
> ____________________________________________________________
> Do You Yahoo!?
> For regular News updates go to http://in.news.yahoo.com
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
>

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:36 PDT