From: Degerstrom, Michael J. (email@example.com)
Date: Thu Apr 12 2001 - 14:13:09 PDT
Do you want to know how to simulate/calculate the loss
or how to go about measuring the loss? 'Measure theoretically'
is the term you used that confuses me.
Mike Degerstrom Email: firstname.lastname@example.org
Mayo Clinic; 200 1st Street SW ; Rochester, MN 55905
Phone: (507) 538-5462 FAX: (507) 284-9171
> -----Original Message-----
> From: Khalid Ansari [mailto:email@example.com]
> Sent: Thursday, April 12, 2001 1:33 PM
> To: firstname.lastname@example.org
> Subject: [SI-LIST] : Attenuation on a PCB trace
> Hi all,
> Is there a way to measure theoretically what the attenuation
> of a signal will
> be after travelling 20" at say a frequency of 2.5 Gbps across
> a 50 ohms PCB
> laid out in FR4 in a microstrip configuration. How about in
> a stripline
> What are the factors that need to be taken in account to
> calculate this.
> Thanks in advance,
> Khalid Ansari
> Switch Fabric Applications
> Advanced Networking Products Division
> Vitesse Semiconductor Corp.
> 3408, Garrett Ave., Santa Clara, 95054
> Phone: (408) 986-4381 x144
> fax: (408) 986-6050
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> email@example.com. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
**** To unsubscribe from si-list or si-list-digest: send e-mail to
firstname.lastname@example.org. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:34 PDT