From: Chris Rokusek (email@example.com)
Date: Wed Apr 11 2001 - 10:48:28 PDT
For an introduction level reference to EMC you might try:
"Noise Reduction Techniques in Electronic Systems" -- Henry Ott
Clayton Paul also has a good book. Sorry no title (someone "borrowed"
There are quite a few EDA vendors offering EMI simulation solutions with
large variance in the modeling techniques used.
> -----Original Message-----
> From: firstname.lastname@example.org
> [mailto:email@example.com]On Behalf Of Haque, Moshiul
> Sent: Wednesday, April 11, 2001 8:20 AM
> To: si-list
> Subject: [SI-LIST] : EMI SIMULATION
> Hi All,
> I am trying an EMI simulation using IBIS model. I am using sigexplorar and
> using a setup where the driver is driving an unterminated transmission
> line. Does anybody had any experience with the EMI simulations? Also can
> anyone suggest me other EMI simulations tool or referrence material?
> Any suggestions would be greatly appreciated.
> Moshiul Haque
> Application Engineer
> Standard Linear and Logic Marketing
> Texas Instruments
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> firstname.lastname@example.org. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
**** To unsubscribe from si-list or si-list-digest: send e-mail to
email@example.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:31 PDT