Re: [SI-LIST] : Diff clocks length matching

About this list Date view Thread view Subject view Author view

From: cadpro2k@dacafe.com
Date: Wed Apr 11 2001 - 09:30:02 PDT


---------Included Message----------
(snip)
> near the clock driver. I learned that the pair needs
> to be length matched to within 2 mils.

Damn! How fast did you say this chip ran? Must have a tremendously fast
edge rate or something! I've never had to match to that close a
tolerance. Wow!

You might access the archives to see about some ansers. It's website
is:
http://www.qsl.net/wb6tpu/si-list/subject.html

Good searching.

-M-
_____________________________________________________________
Tired of limited space on Yahoo and Hotmail?
Free 100 Meg email account available at http://www.dacafe.com

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:31 PDT