RE: [SI-LIST] : SPICE eye diagram

About this list Date view Thread view Subject view Author view

From: Degerstrom, Michael J. (degerstrom.michael@mayo.edu)
Date: Tue Apr 10 2001 - 12:37:26 PDT


You could also simply generate a pwl voltage source with
your selected PRBS pattern. It takes a little programming
to do this efficiently but I think it will run faster than
having to build a LSFR circuit and run it in your simulation.

Mike

_______________________________________________________________
Mike Degerstrom Email: degerstrom.michael@mayo.edu
Mayo Clinic; 200 1st Street SW ; Rochester, MN 55905
Phone: (507) 538-5462 FAX: (507) 284-9171
WWW: http://www.mayo.edu/sppdg/sppdg_home_page.html
_______________________________________________________________

> -----Original Message-----
> From: Ray Anderson [mailto:Raymond.Anderson@Sun.COM]
> Sent: Tuesday, April 10, 2001 1:17 PM
> To: si-list@silab.eng.sun.com
> Subject: Re: [SI-LIST] : SPICE eye diagram
>
>
>
> Yes, certainly is possible. Depending on the variety of spice you
> are using it can range from very easy to requiring just a little work.
>
> Using Hspice or Pspice you need to define a prbs generator by
> building an appropriate LFSR (linear feedback shift register) with
> the correct feedback taps connected for the PRBS length you want
> to use. Utilize the output of your PRBS generator to drive your
> circuit. Then you need to set up your viewing tool (Probe for pspice,
> Awaves for hspice) properly to display an eye diagram.
> (Repetive traces
> need to be superimposed over each other). If you are using
> Apsim Spice,
> generating eye-diagrams is almost automatic. There is a way
> to automatically
> generate PRBS patterns and the viewing facility has a button
> that automatically
> configures things properly for eye-diagram generation.
>
> -Ray
>
>
> >Hi
> >I would like to display eye diagrams in SPICE simulators which
> >means generating a suitable input data pattern. Is it possible
> >in SPICE generate PRBS or PRBS-like patterns?
> >Thanks
>
>
>
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
>

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:30 PDT