[SI-LIST] : Transmission line termination

About this list Date view Thread view Subject view Author view

From: [email protected]
Date: Fri Apr 06 2001 - 00:57:28 PDT

Hello all,
          What is the difference between these two terminations?Why?
1)
             -----------------------
DRIVER->-----| TRANSMISSION LINE |-------------RECIEVER
             ----------------------- \
                Zo=50ohms /Rtt=50ohms
                                          \
                                          /
                                         ---GND
2)

             -----------------------
DRIVER->-----| TRANSMISSION LINE |-------------RECIEVER
             ----------------------- \
                Zo=50ohms /Rtt=50ohms
                                          \
                                          /
                                        ------TERMINATION VOLTAGE=Vtt

If signals of 5V come from drivers,no reflection will take place at the
reciever ends.Since in above two cases,way of termination is
different,what exactly the different uses of these two terminations.

Regards
Sunil

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:28 PDT