[SI-LIST] : 2.5 GHz in FR4

About this list Date view Thread view Subject view Author view

From: Eric Bogatin (eric@gigatest.com)
Date: Tue Apr 03 2001 - 15:11:08 PDT


Sreejith-

I have two app notes and two sets of slides on our web site
(www.gigatest.com) related to your design concerns for 2.5 GHz
signals in FR4. These app notes review the lossy effects in FR4,
how to estimate the contribution from the conductor and
dielectric loss and include measurements from a few boards. They
are # 74, 71, 68 and 67. You are welcome to download them.

--eric

**************************************
Eric Bogatin
CTO, Giga Test Labs
v: 913-393-1305
f: 913-393-1306
e: eric@GigaTest.com
corporate office:
408-524-2700
134 S. Wolfe Rd Sunnyvale, CA 94086
web: www.gigatest.com <http://www.gigatest.com>
**************************************

Date: Tue, 3 Apr 2001 14:37:36 +0530
From: "Sreejith Varma" <varma@blr.paxonet.com>
Subject: [none]

HI All,

i am doing a 2.5Ghz PCB design. i was wondering whether FR4
material
is sufficient for such high speed signals? or i should look at
some
other material for these desings? and if FR4 is sufficient is
there any
special care i have to take (other than impedance matching and
differential
routings)

thanks in advance,
Sreejith
Paxonet Comm. (I) Ltd.
Blore, India

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:26 PDT