[SI-LIST] : Spice to IBIS Model Conversion

About this list Date view Thread view Subject view Author view

From: CAMPBELL,FIONA (A-Scotland,ex1) (fiona_campbell@agilent.com)
Date: Tue Apr 03 2001 - 05:58:28 PDT


Hi all,

Has anyone out there got HP-Spice to work with the s2ibis2 utility?

As suggested on the IBIS web page I have created a link to the HP-Spice
executable but I can't get any of the examples to convert. Looks like
HP-Spice does not understand the level 4 MOS models in the examples so I
have tried it on another test circuit. This time the converter got so far
through then fell over because HP-Spice could not understand the node name
(dumb13806) added by s2ibis2 to one of its spice test circuits. HP-Spice
ran OK on the test circuit when the node name was changed to 13806 so looks
like I will have to change the s2ibis2 source:(

Fiona
----------------------------------------------------------------------------
------
Fiona Campbell Telnet 313 3741
Senior Engineer Phone +44 (0) 131 331 6741
Telecom Network Test Division fax +44 (0) 131 331 7150
Agilent Technologies email fiona_campbell@agilent.com
South Queensferry
Scotland EH30 9TG
----------------------------------------------------------------------------
------
Agilent Technologies UK Limited
Registered Office: Eskdale Road, Winnersh Triangle, Wokingham, Berkshire,
RG41 5DZ
Registered Number: 03809903 England

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:24 PDT