[SI-LIST] : Jitter Measurement

About this list Date view Thread view Subject view Author view

From: Khalid Ansari (khalida@vitesse.com)
Date: Mon Apr 02 2001 - 10:34:06 PDT


Hi,

For jitter measurements at 2.5GHz how accurate is a sampling scope
(Ex: Tek 11801 B/C) as opposed to a Time Interval Analyzer
(Ex: Wavecrest). How about frequencies around 100-200Mhz. In the
case if you don't have a TIA how acceptable are the values taken using
the scope. In the past I have used the scope only for approximate values.

Thanks in advance,
Khalid

---
Khalid Ansari
Switch Fabric Applications
Advanced Networking Products Division
Vitesse Semiconductor Corp.
3408, Garrett Ave., Santa Clara, 95054
Phone: (408) 986-4381 x144
fax: (408) 986-6050
http://www.vitesse.com

**** To unsubscribe from si-list or si-list-digest: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu ****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:24 PDT