From: Dima Smolyansky ([email protected])
Date: Thu Mar 22 2001 - 09:56:27 PST
You may want to check out our application notes on flex interconnect characterization:
TDA Systems, Inc.
11140 SW Barbur Blvd., Suite 100
Portland, OR 97219
(503) 246-2282 (fax)
(503) 804-7171 (mobile)
The Interconnect Modeling Company(TM)
----- Original Message -----
To: [email protected]
Sent: Wednesday, March 21, 2001 2:09 PM
Subject: [SI-LIST] : Flex Characterization
I would appreciate if any body can answer the following:
- Have you characterized a flex before? which tools does that?
What we are trying to do is create an IBIS, or .EBD file for a board. The flex connects two boards. One thing thou is that the flex consists of two wires connected together at the ends (No Planes).
Also, it has some nets that are signals and other that are power and ground.
Thank you in advance
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected] In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:18 PDT