From: Mikhail Matusov (firstname.lastname@example.org)
Date: Mon Mar 19 2001 - 14:07:18 PST
Can you recommend a good source on this jitter mathematics that you
mentioned? I've been looking for some information on relationship between
phase noise and jitter for a long time...
Hardware Design Engineer
Square Peg Communications
Tel.: 1 (613) 271-0044 ext.231
Fax: 1 (613) 271-3007
----- Original Message -----
From: Paul Levin <email@example.com>
To: Sunil Kumar <firstname.lastname@example.org>; si-list <email@example.com>
Sent: Monday, March 19, 2001 11:39 AM
Subject: Re: [SI-LIST] : Jitter measurement
> Dear Sunil,
> Better than either of these would be to get your hands on a good,
> old-fashioned analog spectrum analyzer. Center your display on
> the nominal frequency and then decrease your resolution bandwidth
> (and everything that goes along with it) so that you can see the
> detail in the first few KHz on either side of the center frequency.
> You'll have to study up on jitter mathematics and dBc offsets, but
> once you've got that straight, you can integrate the flanks of your
> oscillator between any f1 and f2 and determine the likely jitter
> arising from noise in that frequency range.
> Paul Levin
> Senior Principal Engineer
> Logic Innovations
**** To unsubscribe from si-list or si-list-digest: send e-mail to
firstname.lastname@example.org. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:16 PDT