RE: [SI-LIST] : DIMM

About this list Date view Thread view Subject view Author view

From: Greim, Michael (mgreim@sonusnet.com)
Date: Fri Mar 16 2001 - 08:00:36 PST


My answer would be it depends. The last dimm I looked
at had series terms on the lines so if I read your question
correctly, that would end up being department of
redundancy department terminnation. The best answer
I have is simulate it and see if they are required. I
don't know that a simple rule of thumb will work for
everything out there.

Best Regards,

Michael C. Greim Sonus Networks
mgreim@sonusnet.com 978-589-8336

Making the world safe for digital signals everywhere

And all this science I don't understand
It's just my job six days a week

The time is gone. The email's over
Thought I'd something more to say......

-----Original Message-----
From: KokTongTHAM [mailto:kt_tham@uti2000.co.jp]
Sent: Friday, March 16, 2001 10:06 AM
To: si-list@silab.eng.sun.com
Subject: [SI-LIST] : DIMM

Dear SI Gurus,

Can anybody tell me if any termination resistors required at the end
of the DIMM connectors for Data lines?

Regards,
KT.THAM

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:14 PDT