From: Doug McKean (firstname.lastname@example.org)
Date: Mon Mar 12 2001 - 18:39:33 PST
Are you making sure that the ground pins of the module are
engaging first? It's done by having the ground pins in the
connector of the module longer than any of the other pins.
This allows ground to be established just prior to power
being connected throughout the module.
*Usually* a fix for such problems, but I can't guarantee it.
Regards, Doug McKean
**** To unsubscribe from si-list or si-list-digest: send e-mail to
email@example.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:11 PDT