RE: [SI-LIST] : How to corelate max. overshoot and undershoot values?

About this list Date view Thread view Subject view Author view

From: Ken Cantrell ([email protected])
Date: Fri Mar 09 2001 - 07:32:06 PST


Hear, hear! We have a responsibility to ourselves to "move" vendors in the
right direction, and nothing talks louder than the bottom line for vendors
who are not paying attention.

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Ingraham, Andrew
Sent: Thursday, March 08, 2001 7:52 PM
To: [SI-LIST]
Subject: RE: [SI-LIST] : How to corelate max. overshoot and undershoot
values?

The problem is that all these things (Absolute Min & Max ratings, Vil(min) &
Vih(max) ) are DC or steady-state limits whereas overshoots are transients.

In many applications, it can be nearly impossible to contain overshoots to
no more than 0.3V or 0.5V or whatever is the spec DC limit. Sometimes real
signals simply don't work that way.

Unfortunately, without some sort of overshoot tolerance information from the
vendor, I don't think you can decipher what you need from the data sheet.
Without a spec, you really must go back to the vendor and press him for a
spec, or abandon that vendor and get your chips from someone else (and let
the first vendor know what you did and why).

Andy

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:10 PDT