[SI-LIST] : PECL Termination

From: Steinkogler, Gary ([email protected])
Date: Thu Mar 08 2001 - 14:40:01 PST

• Next message: Patel, Bhavesh: "RE: [SI-LIST] : PECL Termination"
• Previous message: Yuan Li: "[SI-LIST] : SI characterization"
• Next in thread: Patel, Bhavesh: "RE: [SI-LIST] : PECL Termination"
• Maybe reply: Patel, Bhavesh: "RE: [SI-LIST] : PECL Termination"
• Reply: Mike Jenkins: "Re: [SI-LIST] : PECL Termination"

I have Differential PECL running at 327Mhz. I have seen thevenin equivalent
parallel, Y variance, diode terminations, but not much on three point
termination - 120 ohm across differential pair and 280 ohm from each signal
to ground. Anybody out there ever use the 3 point topology?

Gary Steinkogler
Optical Solutions
16305 36th Ave. North
Suite 300
Minneapolis, MN 55446-2698
Phone: (763) 268-3633
Fax: (763) 268-3301
Main: (763) 268-3300

email:[email protected]

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Patel, Bhavesh: "RE: [SI-LIST] : PECL Termination"
• Previous message: Yuan Li: "[SI-LIST] : SI characterization"
• Next in thread: Patel, Bhavesh: "RE: [SI-LIST] : PECL Termination"
• Maybe reply: Patel, Bhavesh: "RE: [SI-LIST] : PECL Termination"
• Reply: Mike Jenkins: "Re: [SI-LIST] : PECL Termination"

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:09 PDT