Re: [SI-LIST] : Combined single-ended/differential termination pa ckage?

About this list Date view Thread view Subject view Author view

From: RMELLISON@aol.com
Date: Sat Mar 03 2001 - 19:11:44 PST


Ok Steve, I understand your point, but my idea was that the common mode
rejection of the differential receiver takes over at some lower frequency,
making a lesser need for low frequency common mode termination. Of course,
if the common mode voltage is so severe that it exceeds the input range of
the IC, then it has to be terminated for these frequencies.
I don't have any idea what the frequency range for good common mode rejection
for PECL is, do you?
Rich

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:07 PDT