Re: [SI-LIST] : Interconnects

About this list Date view Thread view Subject view Author view

From: Dima Smolyansky (dima@tdasystems.com)
Date: Thu Mar 01 2001 - 14:53:51 PST


Rich:

If I understood your question correctly, a good model should predict your interconnect behavior whether this interconnect is used within 50 Ohm environment or other impedance values.

Thanks,

===================
Dima Smolyansky
TDA Systems, Inc.
11140 SW Barbur Blvd., Suite 100
Portland, OR 97219
(503) 246-2272
(503) 246-2282 (fax)
(503) 804-7171 (mobile)
http://www.tdasystems.com
The Interconnect Modeling Company(TM)

  ----- Original Message -----
  From: Rich Peyton
  To: SI News group
  Sent: Wednesday, February 28, 2001 12:47 PM
  Subject: [SI-LIST] : Interconnects

  Question for all SI Gurus:
  Most electrical data supplied by interconnect companies are based upon an ideal Characteristic Impedance of 50 Ohm test configuration. Now if a customer did not have an ideal 50 Ohm situation all this info is basically for reference, for there engineering Dept. Because alot of Info is dependent on customers configuration, my question is: What info is "most important" in determining selection of interconnects for High or Low Frequencies, without knowing configuration?

  Thanks for the replies,
  Rich

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:06 PDT