I recently purchased a set of Palm Mini paddles for portable operating. I love the magnet base, which attaches nicely to the side of my little YouKits HB-1B transceiver. However, in some situations -- like sitting on the ground or operating from inside my truck -- that isn't always the most convenient arrangement for me. Here's a little hack I came up with to solve that problem.

I purchased an inexpensive 6-inch by 9-inch, acrylic clipboard at my local office supply store. I used some GOOP adhesive to attach two steel washers to the clipboard, as shown in Figure 1. I made sure that the washers lined up with the magnets on the base of the paddles. Figure 2 shows the paddles attached to the clipboard. Figure 3 shows the clipboard in use during a recent outing. For transport, the little clipboard fits in the small plastic container I use for the HB-1B and accessories.

For less than $2.00, this little accessory makes portable operating a bit more convenient.

73, Craig WB3GCK

Click for full-size image
Figure 1

Click for full-size image
Figure 2

Click for full-size image
Figure 3

Back to Homepage