Dyno pictures

Dyno, sepex motor on the left and BLDC on the right http://www.qsl.net/w8rnh/dyno/dyno1.jpg

100A BLDC control http://www.qsl.net/w8rnh/dyno/64frame2.jpg

100A BLDC control http://www.qsl.net/w8rnh/dyno/64frame3.jpg

Dyno, thermal image http://www.qsl.net/w8rnh/dyno/64thrml1.jpg

Dyno, load bank http://www.qsl.net/w8rnh/dyno/64thrml2.jpg

Dyno, http://www.qsl.net/w8rnh/dyno/64thrml3.jpg

Dyno, sepex motor on the left and BLDC on the right http://www.qsl.net/w8rnh/dyno/dyno2.jpg

Dyno, 100A 3 phase BLDC with ‘high tech’ heatsink http://www.qsl.net/w8rnh/dyno/dyno3.jpg

100A 3 phase BLDC closeup http://www.qsl.net/w8rnh/dyno/dyno4.jpg

Dyno, back view of BLDC motor http://www.qsl.net/w8rnh/dyno/dyno6.jpg

Dyno, another view of the setup http://www.qsl.net/w8rnh/dyno/dyno7.jpg

Plans for the production version;

1. Enclosure will be an extruded piece of aluminum with fins.

2. The enclosure can either be mounted on the back of the motor or have top and bottom aluminum pieces with a rubber seal.