So, I have a bunch of these Raspberry Pi computers and wanted to see what else
I can use them for in my Amateur Radio Hobby.
So Far...
EchoIRLP Node
TNCPi Packet node
Echolink Proxy Server
Allstar Node (Actually a Beaglebone Black)

So next was a Streaming Audio Server to send the audio of my Amateur Radio Repeater
to Broadcastify.com (Formerly Radio Reference)
I already have a Scanner stream online at Broadcastify using a Windows XP Computer
so I was familiar with how this works, But it was time to try it with the Pi.

Fortunately for me there were others who have done this already, so I followed their instructions
and I will include the links I found which helped me get this project going.
They documented it so well I do not have to repeat it here.

Using a Raspberry Pi Micro-Computer for a Broadcastify Feed

Steffen Müller site to recompile darkice
(Also Thanks to Jim for his darkice-icecast.img file.  I was pulling my hair out with this
until i realized I was using the incorrect mountpoint and password to Broadcastify)

My Distro is Raspian Wheezy
and my USB Sound fob is a Syba SD-CM-UAUD

This is from : KP4TR)Ramon Gonzalez kp4tr.ramon@gmail.com via hamvoip.org

I posted the below message on wrong allstar reflector, but may be helpful for anyone wanting to stream audio with Allstar.

To install EZStream for streaming audio, see below commands.

    cd /root
    pacman -S lame
    pacman -S pkg-config
    pacman -S libshout
    wget http://downloads.xiph.org/releases/ezstream/ezstream-0.5.6.tar.gz
    tar xvzf ezstream-0.5.6.tar.gz
    cd ezstream-0.5.6

If all is good, run:
    make install

To add streaming audio in Allstar, add this to rpt.conf under the node stanza, with an appropriately configured ezstream.xml

    ;Stream to Broadcastify
    outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8.0 --bitwidth 16 - - | /usr/local/bin/ezstream -c /etc/ezstream.xml

(Note: I have not tried this yet, but plan to asap. Bob W2YMM)