[SI-LIST] : Pspice accuracy / View a spice netlist in "human format" / ibis2spice not working with pspice

About this list Date view Thread view Subject view Author view

From: Uffe Nielsen ([email protected])
Date: Mon May 14 2001 - 04:00:35 PDT

Hello All

I'm working on simulation of a 100MHz bus driven by Intels StrongArm processor. The simulation software is Pspice (comes with Orcad). Does any one know how accurate pspice is ? How high frequencys can be simulated ?

I have the processor model in IBIS 2.0 format, all other loads on the bus are simulated using standard spice components. Since pspice only support ibis (via build-in translator) upto version 1.3 I have to translate the IBIS files with intusofts Ibis2spice converter. The output is unfortunately not 100% compatible with pspice, so a lot of work has to be done in a text editor. Does anyone know a lighter way to translate ibis 2.x models into pspice? Or perhaps a way to translate ibis 2.0 to 1.3 models (making it possible to use pspices own translator) ?

Finally the translated Intel SA model are quit complex. Does anyone know a tool that can prettyprint a spice netlist ? (The translated devices are all subckt's).

-----------------------------------------------------------
Med venlig hilsen / Best regards
Uffe Nielsen,
Mobintech - Mobile Internet Technology A/S

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:56 PDT