[SI-LIST] : connector to PCB

From: Yibing Tang ([email protected])
Date: Mon May 07 2001 - 12:04:56 PDT

• Next message: Ron Miller: "RE: [SI-LIST] : which layers should I use for routing my high spe ed traces"
• Previous message: Greim, Michael: "RE: [SI-LIST] : which layers should I use for routing my high spe ed traces"
• In reply to: Saeen Malik: "[SI-LIST] : which layers should I use for routing my high speed traces"
• Next in thread: Michael Nudelman: "RE: [SI-LIST] : connector to PCB"
• Maybe reply: Michael Nudelman: "RE: [SI-LIST] : connector to PCB"

Hi, All,

For high speed signal, controlled impedence line is very good for in-board
transmission. However, sometimes, we need to connect the signal to other PCB
board use co axial cable. That certainly will introduce field mismatch
between traces and cable, and result in reflection between those. I want to
hear some discussion on this topic.
Thanks alot,

Yibing Tang
[email protected]

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Ron Miller: "RE: [SI-LIST] : which layers should I use for routing my high spe ed traces"
• Previous message: Greim, Michael: "RE: [SI-LIST] : which layers should I use for routing my high spe ed traces"
• In reply to: Saeen Malik: "[SI-LIST] : which layers should I use for routing my high speed traces"
• Next in thread: Michael Nudelman: "RE: [SI-LIST] : connector to PCB"
• Maybe reply: Michael Nudelman: "RE: [SI-LIST] : connector to PCB"

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:51 PDT