RE: [SI-LIST] : Plane short

About this list Date view Thread view Subject view Author view

From: Stubbs, Jason ([email protected])
Date: Mon Apr 30 2001 - 07:20:14 PDT

Is this what you're looking for???

http://www.toneohm.com/

> -----Original Message-----
> From: Michael Nudelman [mailto:[email protected]]
> Sent: Monday, April 30, 2001 9:00 AM
> To: 'Bastola, Subas'; [email protected]
> Subject: RE: [SI-LIST] : Plane short
>
>
> 1. Method One. If your power supply is capable of providing
> undervoltage
> protection without pulsing (pumping more or less large
> constant current
> through the short) - measure the voltage drop gradient and
> find the short.
> Works for me.
>
> 2. Method Two. Using milliohmmeter and "Freeze" spray, find
> the place that
> reacts "violently" (rapidly changing resistance) while
> sprayed. This is
> likely (80-90%) to be the spot where short is. Also works for me.
>
> 3. There used to be a hand-held device on the market, size of
> a logic probe,
> that produced variable tone depending on the closeness to the
> shorted spot.
> Took me 2-3 minutes max to find the exact location (required
> good hearing -
> I have an absolute pitch).
> Problem - I've been trying to locate the device
> unsuccessfully for 4 years
> now. Seems like they either withdrew it due to the lack of
> demand or I do
> not know where to look.
>
> IF ANYONE KNOW ABOUT THIS ONE PSE LET ME KNOW - WILL BE
> FOREVER IN YOUR
> DEBT! :-))))
>
> Mike
>
> -----Original Message-----
> From: Bastola, Subas [mailto:[email protected]]
> Sent: Saturday, April 28, 2001 11:56 PM
> To: [email protected]
> Subject: [SI-LIST] : Plane short
>
>
> What is the best method to find the location of a short
> between the power
> and gnd plane in a fully assembled board? Can TDR help?
>
> Subas Bastola
> Intel
>
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> [email protected]. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> [email protected]. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
>

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:46 PDT