From: Degerstrom, Michael J. (email@example.com)
Date: Wed Apr 25 2001 - 07:19:58 PDT
You can't get R, L, and C from just the impedance.
You will also need the delay (D) across the flex circuit.
Then L=D*Z, C=D/Z. You need more information to get
Mike Degerstrom Email: firstname.lastname@example.org
Mayo Clinic; 200 1st Street SW ; Rochester, MN 55905
Phone: (507) 538-5462 FAX: (507) 284-9171
> -----Original Message-----
> From: BIBICHA [mailto:email@example.com]
> Sent: Tuesday, April 24, 2001 5:02 PM
> To: firstname.lastname@example.org
> Subject: Re: [SI-LIST] : TEST/R, L and C of a Flex Circuit
> Thanks guys for confirming that.
> I got this e-mail s well but I did not get copies of two
> e-mails I sent out
> earlier and here it is again:
> Hi all:
> Anybody knows how to compute
> R, L and C of a Flex circuit from the impedance?
> (I have the impedance of a flex circuit and I need to get R, L and C)
> Thanks so much
> ----- Original Message -----
> From: "Kim Helliwell" <email@example.com>
> To: "BIBICHA" <firstname.lastname@example.org>
> Sent: Tuesday, April 24, 2001 5:46 PM
> Subject: Re: [SI-LIST] : TEST
> > > BIBICHA wrote:
> > >
> > > I am just testing if you guys get my e-mail(s)
> > > Do you?
> > >
> > > Bouchra
> > Yep
> > --
> > Kim Helliwell
> > Senior CAE Engineer
> > Acuson Corporation
> > Phone: 650 694 5030 FAX: 650 943 7260
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> email@example.com. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
**** To unsubscribe from si-list or si-list-digest: send e-mail to
firstname.lastname@example.org. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:44 PDT