[SI-LIST] : Splitting a lead carrying input or control signal in a memory package

About this list Date view Thread view Subject view Author view

From: ÃÖ±¤� ([email protected])
Date: Thu Mar 22 2001 - 01:26:58 PST


Hi~ there,

I am simulating the package electrical properties for memory devices.

Usually, if a lead carrying input data signal has low capacitance, then I split its adjacent power or ground lead to reduce the distance between the lead and power or ground lead so that the lead can have proper capacitance.

The probem that I ask to you is that in case there are no adjacent power or ground lead near the lead with low capacitance, can I split the lead carrying input data or control signal to reduce the distance to its adjacent lead?

Thanks for your kind advice in advance.

Bye,

Kwang-Seong Choi
Packaging Engineer
Hyundai MicroElectronics Co. Ltd.

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:18 PDT