From: Doug Hopperstad ([email protected])
Date: Fri Mar 16 2001 - 11:13:26 PST
Take a look at this web page. It has a good article on Decoupling caps. I
hope it helps.
ftp://ftp.qsl.net/pub/wb6tpu/si_documents/epep-98.pdf
<ftp://ftp.qsl.net/pub/wb6tpu/si_documents/epep-98.pdf>
<ftp://ftp.qsl.net/pub/wb6tpu/si_documents/epep-98.pdf>
Doug Hopperstad
Qlogic
-----Original Message-----
From: Kai Siang [mailto:[email protected]]
Sent: Friday, March 16, 2001 12:17 PM
To: [email protected]
Subject: [SI-LIST] : Layout of Bypass Cap
Hi,
A question on bypass caps. How do I place bypass caps ? Do i connect a fat
short trace from the pad of surface mount cap to the supply pin of the IC
and then punch a via to the power plane near this pin ? Or can i place the
cap physically near the supply pin and just punch a via into the power plane
? Which approach is better ?
Thanks
Kai Siang
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:14 PDT