# Re: [SI-LIST] : Re: approximations for partial self inductance

Date: Thu Mar 15 2001 - 09:37:29 PST

Dear Chris,

"Reid, Chris" wrote:

> Hello,
>
> Actually, the statement:
>
> > It is a principle
> > of Maxwell's equations that high-speed returning signal
> > current will flow in whatever path produces the
> > least overall inductance.
>
> is not really correct.

Are you sure? I thought Howard might have some explanation/interpretation.

> Instead of inductance, think of
> resistance for a moment. If you put two resistors in parallel,
> one 100 Ohms and the other 1 Ohm the effective resistance is
> 1/(1/100 + 1/1) =~ 0.99 Ohm. Clearly most of the current
> flows through the 1 Ohm resistor, but some also flows through
> the 100 Ohm resistor.
>
> Inductance is similar, only now the result depends on frequency.

^^^^^^^^^^^^^^^^^^^
Are you sure? You are not relating inductance to ohm's law, I suppose.

Just want to make sure.

Thanks,
Sainath

>
> Chris
>
> -----Original Message-----
> Sent: Wednesday, March 14, 2001 6:19 PM
> To: Howard Johnson; si-list@silab.eng.sun.com
> Subject: Re: [SI-LIST] : Re: approximations for partial self inductance
>
> Dear Howard,
>
>
> Howard Johnson wrote:
>
> > Dear Itzhak Hirshtal and Brian Young,
> >
> > The difficulties with approximating the inductance
> > of a via are even worse than you
> > may have suspected. Both approximations are flawed whether
> > you use +1 or -3/4, (or, as I have also seen, -1).
> >
> > The issue of the exact constant (1, -3/4, or something
> > the path of returning signal current. (Current always
> > makes a loop; when signal current traverses the via,
> > a returning signal current flows SOMEWHERE in
> > the opposite direction.). It is a principle
> > of Maxwell's equations that high-speed returning signal
> > current will flow in whatever path produces the
> > least overall inductance.
>
> My question is on this last statement. I like to understand which
> Maxwell's equation suggests this and how? Thanks.
>
> Sainath
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:13 PDT