DDS using AD985x

Material for this project is available on the net. Main contribution is from OM3CPH who has it well documented on his site.

All interested home brewers are requested to visit the site and then try this project. The pitch of the pins of the IC are very close and requires SMD soldering Iron. The IC is costly and therefore requires some care in soldering it on the board. Most of the parts on the board are in SMD. Some where on some other site, details of the output filters are mentioned. I shall try to put up the link on this site soon.

All critical points from the IC are brought out for future interfacing. You can clock the Unit externally also.

I would be making the Controller Board shortly and that would also be put up on this site.

Would like to hear from all those who have made this project.

ba.jpg (1093 bytes)    wpe1.jpg (1428 bytes)

Last revised: February 23, 2003 22:15.