Personal Homepage of
Christopher Glanville - VK3KQU
In 2010 I
graduated from LaTrobe University in Melbourne with a double degree in
Electronics Engineering with Honours and a Masters of Biomedical Engineering.
Software design reusability is implemented to reduce the amount of work that
needs to be performed by software engineers. This means that for example if
someone writes a driver they may publish that driver so that other programmers
don’t need to write the same driver. For this reason I have decided to publish
this website so that people can apply this principal to Hardware Engineering.
Below is a list of devices that can be used as functional building blocks in a
system design. These designs are open for use and you are welcome to share and
change them as you please. If you have any suggestions for this website, a
design on this website or me personally then please feel free to e-mail me at [email protected].
(Pages under
construction)
·
Project P000001 – Serial Interface LCD character
display screen
·
Project P000002 – USB Interface LCD character
display screen
Christopher Glanville - Hardware
Engineer
My
enthusiasm for hardware engineering came from exposure at a young age to Amateur Radio. Some projects I have been
involved in to-date include:
·
APRS packet digipeater and gateway,