+++++++++++++++++++
Date: Sun, 9 Dec 2001 08:00:00 +0000
From: David Pratt <david at kippax.demon.co.uk>
Subject: Re: [Elecraft] KIO2 and CW

In a recent message, Dan Kolean <dkolean at iserv.net> said....
>Hi Gang,
>
>Could someone tell me if the KIO2 can be used to send CW?  If so, what
>software can be used for this purpose?  Has anyone found a favorite program
>for this purpose?  Thanks for the input.

Yes, Dan, use the K2Remote program on the Elecraft web site.  At the
moment the type-ahead feature is limited to just a few characters. But I
have just had a look at the web site and I see that is due to be updated
on Monday.

73

David G4DMP

+++++++++++++++++++
Date: Sun, 9 Dec 2001 07:47:41 EST
From: JohnK1JD at aol.com
Subject: Re: [Elecraft] KIO2 and CW

>Could someone tell me if the KIO2 can be used to send CW?  If so, what
>software can be used for this purpose?  Has anyone found a favorite program
>for this purpose?  Thanks for the input.

The freeware program for the Kenwood TS570 (RCP570) works well in this 
regard. 

http://216.133.235.165/Amateur/RCPsoftware/TS570DRCP2/


73,
John  K1JD
Jamestown,  RI
IOTA NA31
K2's #139 & #583

+++++++++++++++++++
Date: Tue, 11 Dec 2001 09:48:02 -0000
From: bejones at hursley.ibm.com
Subject: Re: [Elecraft] KIO2 and CW

Dan
      the control program of the Elecraft site does fine. For CQWW I 
wanted the ability to send several precanned messages so wrote 
my own CW sending program. It was written in Delphi and totally 
trivial (took about 10 mins) simply using the KY command to send 
one of several text strings when the relevant button was pressed 
.Probably a snap to write in Visual Basic too.

If anyone wants a copy I'll tidy it up but it really is pretty much a 
one-off hack.

Brian G0UKB
Brian E Jones
Pervasive Computing Specialist
IBM HURSLEY

++++++++++++++++++