+++++++++++++++++++

See also K2_PRE_ATT_Problem

++++++++++++++++++++
Date: Sat, 29 Sep 2001 08:16:16 EDT
From: Rmwoodchuck at aol.com
Subject: [Elecraft] IF Amp

Hi,

I am doing the I.F. amp alignment on K2 #2250. Other than the typical problem 
of peaking L34 it seems to be going fairly well and I am now receiving strong 
signals. I do have a question about the pre-amp though. On page 61 before you 
begin tuning you are supposed to make sure the PRE annunciator is on. I had a 
very hard time hearing anything when this was on and had to turn it off in 
order to tune the inductors. Is this normal or do I have a problem somewhere?

Thanks
Marie, NG8S

K1 #650
K2 #2250(in progress)

++++++++++++++++++++
Date: Sat, 29 Sep 2001 11:03:49 EDT
From: Rmwoodchuck at aol.com
Subject: [Elecraft] Re: IF Amp

Thanks for the replies. It was T6...had the #1 and  #2 leads switched. Makes 
a big difference. 

Thanks again,
Marie, NG8S

K1 #650
K2 #2250(in Progress)

+++++++++++++++++++