++++++++++++++++++

See also K2 Voltage Display 0.00 Volts

++++++++++++++++++
Reply-To: "rich a." <rckchp at home.com>
From: "rich a." <rckchp at home.com>
To: <support at elecraft.com>, "Steve Lawrence" <Steve.Lawrence at ITWFEG.COM>
Cc: <elecraft at mailman.qth.net>
Subject: Re: [Elecraft] K2:  False "Lo Batt" Indication
Date: Tue, 8 Jan 2002 09:49:30 -0500

Steve,

Check switch S1 on the control board and see if you've inadvertently
bumped it off the 12v position. I just had the same symptoms a few days
ago and that was the "problem"

Rich  KB2CPE


>Subject: [Elecraft] K2: False "Lo Batt" Indication

>I then noticed a "Low Batt" warning on the display.  Changing the
display to
> the V/A reading, in receive on 40M I was presented with "E00.0 i0.28".

+++++++++++++++++++++