+++++++++++++++
Reply-To: <la3za at qsl.net>
From: "Sverre Holm - LA3ZA" <la3za at qsl.net>
To: "'Daniel'" <kg4dni at truthmail.com>, <elecraft at mailman.qth.net>
Subject: RE: [Elecraft] Higher pwr output on K2 on CW causes 'GAWK'
Date: Mon, 2 Dec 2002 20:24:45 +0100

My K2 behaves like this if I run it from a power supply or battery that
cannot supply enough current so that the voltage falls below about 9-9.5
Volts during transmission.


Sverre
LA3ZA

> -----Original Message-----
> From: elecraft-admin at mailman.qth.net 
> [mailto:elecraft-admin at mailman.qth.net] On Behalf Of Daniel
> Sent: 2. desember 2002 15:35
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] Higher pwr output on K2 on CW causes 'GAWK'
> 
> 
> Higher pwr output on K2 on CW causes 'GAWK'
> 
> Hi,
> 
> Last time I posted this message I forgot to mention that I 
> have only the K2.  I operate CW past 0.1W and get a vibrating 
> 'GAWK' coming from the speaker.  What is my problem?
> 
> Daniel
> kg4dni
> K2 only

++++++++++++++++