+++++++++++++++++ Date: Thu, 14 Feb 2002 13:55:19 -0500 (EST) From: Dave Gingrich K9DC To: k6iii at juno.com Cc: elecraft at mailman.qth.net Subject: Re: [Elecraft] K2, Anti-VOX? On Thu, 14 Feb 2002 k6iii at juno.com wrote: > It just occurred to me what might be the problem in my K2 I reported a > few weeks ago regarding Loud SSB signals cutting off the received audio. > I described it was just the opposite of a squelch function; i.e. cutting > off audio instead of turning it on in the presence of loud signals. > > This seems to only happening on SSB when I am using VOX (on a speaker, > not head phones). Could it be the Anti-VOX tripping? > > I looked through both PRI and SEC menus and did not see anything about > Anti-VOX. I presume there is some threshold that can be set. Where is it? There is no anti-vox in the K2. I believe the recommendations is to use headphones when using Vox. Dave K9DC +++++++++++++++++++ Reply-To: "Bob Lewis (AA4PB)" From: "Bob Lewis (AA4PB)" To: Subject: Re: [Elecraft] K2, Anti-VOX? Date: Fri, 15 Feb 2002 07:44:41 -0500 There is no Anti-VOX on the K2. If the microphone picks up audio from the speaker then the VOX will trip. It is best to use headphones when using VOX or at least keep the receiver audio down. +++++++++++++++++++++