Glossary of Semiconductor Terminology
The table below gives an outline of some of the more commonly used terms using in association with semiconductor design and manufacture.
Acceptor Impurity |
An impurity added to an intrinsic semiconductor that will accept an electron from a neighbouring atom to create a hole. |
Active Device |
A device that has gain or controls another circuit. |
Anode |
The positive terminal of a device. |
Avalanche breakdown |
Reverse voltage breakdown that occurs when electrons gain sufficient energy that when they collide with other atoms they can free further electrons, and thereby creating more majority carriers. |
Base |
The region of a bipolar transistor situated between the collector and emitter. It originally gained its name because it formed the base material for the transistor. |
Carrier |
See current carrier |
Cathode |
The negative terminal of a device. |
Channel |
The region between the drain and source of a FET that carries the current flowing through the device. |
Collector |
One of the connections to a bipolar transistor. |
Crystal lattice |
The lattice or regular pattern in which atoms arrange themselves in a crystal. |
Current carriers |
The charged items, either electrons or holes that carry the current in a conductor or semiconductor. Both of them are mobile, and under the influence of a voltage they are caused to move, and this constitutes a current. |
Depletion layer |
The area in a p-n junction that is free of current carriers, i.e. it is depleted of carriers. |
Diode |
A two electrode device that has an asymmetrical V/I characteristic, and generally allows current to flow only in one direction. |
Donor impurity |
An impurity that gives or donates an extra electon into the crystal lattice. |
Doping |
The process where impurities are added to a semiconductor. |
Drain |
One of the electrodes connected to the channel in a field effect transistor |
Electron |
A negatively charged particle contained in an atom. |
Emitter |
One of the connections to a bipolar transistor. |
Epitaxy |
The growth of material onto a semiconductor. In this process the new material assumes the same crystal structure as the starting semiconductor. |
Extrinsic semiconductor |
A semiconductor whose electrical properties depend upon the presence of the impurities. |
Gate |
The control electrode in a field effect transistor. |
Heterojunction |
A p-n junction in a semiconductor between materials of different composition. Normal junctions are between p and n type versions of the same material. |
Hole |
The space left by an electron when it moves out of the orbit in an atom. It has a charge equal and opposite to that of an electron. In just the same way that electrons can move around a crystal lattice, holes can also move. |
Impurities |
The small traces of material added to a semiconductor. They have a valency of either one greater or less than that of the intrinsic material and in this way they add either holes or electrons to the lattice. |
Intrinsic semiconductor |
A pure semiconductor containing no impurity atoms. |
Leakage current |
The current that flows across a reverse biased p-n junction. |
Majority carriers |
The type of current carrier that predominates in a current flow. |
Minority carriers |
The type of current carrier that provides less than half the current flow. |
Mobility |
The ease with which the carriers flow. Holes are less mobile than electrons. The mobility is also dependent upon the type of material. |
n-type semiconductor |
Doped semiconductor in which the electrons outnumber the holes. |
n+ semiconductor |
Very heavily doped n-type semiconductor. |
Photoresist |
An emulsion that is applied to the semiconductor surface, and is sensitive to light. It is exposed to the pattern required for the next stage in the fabrication process. It is then washed and only the soluble areas are left to protect the semiconductor surface to the next stage of the process. |
Planar transistor |
A transistor or circuit that is fabricated by selective etching and diffusion. |
p-type semiconductor |
Doped semiconductor in which the holes outnumber the electrons. |
p+ semiconductor |
Very heavily doped p-type semiconductor. |
Recombination |
The process where a hole and electron combine. |
Source |
Th electrode at one end of the channel of a field effect transistor. |
Substrate |
The foundation or supporting base material on which an integrated circuit is fabricated. |
© Ian Poole Last Updated 15th Nov 1998