Radio Control Software
Commander
a free application that controls
up to 3 Icom, TenTec, Kenwood, Yaesu, Elecraft or FlexRadio transceivers,
switching between them manually or automatically based on frequency, and
displaying frequency-dependent settings for devices like tuners and amplifiers.
AirSCAN
Uniden BC895XLT control software.
Alinco DJX 10 software
MS-DOS programming software for
use with Alinco's DJ-X10 Wide Band Communication Receiver.
AREight
This is the most advanced scanner
software for the AR8200 and the AR8600. It can effect any type of scan, can
scan from 1KHz to 3000MHz in one time. The AREight is a software for help you
to listen signals from around the globe on the shortwave bands.
BC245 Control
Windows 95/98/Me/NT Radio control
for Uniden Bearcat BC245xlt.
BC245XLT Remote Control
BC245XLT Uniden Bearcat remote
control software for the PalmOS freeware.
BuTel Software
Software Information PC Interfaces
for the scanning radio hobbyist & professional radio control applications.
CallSign Software
Hi-end software for the Ten Tec
software radio line inluding Pegasus Jupiter and RX-320.
Computer Aided Technologies
Producers of Scancat, Copycat,
Magic and Distributors of HOKA's CODE-3 and CODE-30 decoders.
Control CAT FT 847
Control software for Yaesu FT-847.
Control Software for AOR AR5000
Full 32 bit multi-tasking
multi-threaded control software for AOR AR5000.
DJ-X2 programming software
Alinco DJ-X2T programming software.
DJ-X2000 programming software
Alinco DJ-X2000 software.
DJ-X3 Programming software
Alinco DJ-X3 software.
DXtra Inc. WorldStation(TM) - RX-320
WorldStation(TM) is a graphically
advanced control program for the Ten-Tec RX-320. Written entiely in Java 2,
WorldStation(TM) runs on Windows 95/98/NT, Linux and MAac platforms.
EchoStation
"EchoStation is a
repeater-control program for Windows which makes it easy to set up a complete,
fully-functional repeater or ""announcement machine"" using
a personal computer".
ERGO Radio Software
Creative Express Corporation
software to enhance shortwave radio listening. Support for Drake R8A/B,
NRD535/D, WJ HF-1000 and TEN-TEC RX-320 receivers, as well as propagation, path
evaluation and database management.
FT-817 Commander
The ultimate free CAT program for
the Yaesu FT-817.
FT-817 Commander download support site
The official FT-817 Commander and
PSK31 Deluxe download support site.
FT100 SuperControl
CAT control and logging software
project especially developed for the YAESU FT-100 transceiver. The program is
based on the design of FT847-SuperControl.
FT1000MP-SuperControl
FT1000MP-SuperControl is a
complete CAT control and "better than nothing" logging program, based
on the legendary FT847-SuperControl program. The program has been developed
especially for the FT-1000MP transceiver series including Mark-V and Field.
FT736
Tuning control of the Yaesu
FT-736R multiband VHF/UHF transceiver.
FT847-SuperControl CAT
FT847-SuperControl is a CAT
software especially for the FT-847 transceiver from YAESU. You can download a
trial version.
FTB8900
Memory management (cloning) software
for the Yaesu FT-8900R quad band FM mobile transceiver.
FTBasic
FTBasic is a CAT control program
for Yaesu radios FT100, FT817, FT847, FT1000MP Mark V and FRG100.
FTBVR5K - VR-5000 Memory Management
FTBVR5K is a memory management
program for the Yaesu VR-5000 scanning receiver.
Ham Radio Deluxe
Free CAT Control software for
Elecraft, Kenwood, ICOM, Ten-Tec and Yaesu. Requires Windows 95 or higher.
IC-746 soft control by IW2BSQ
IC-746 radio control program in
italian and personale info.
ICOM IC756PROII CAT and Server Software
ICOM CAT software for the
IC-756PROII, R-9000 and IC706MKIIG. All Windows and Windows CE platforms.
Kenwood Smart Memorry
"KSM is a program to read and
update the memory channels of a ""Kenwood"" amateur radio.
The current supported types are: TS-450S, TS-570D, TS-570S, TS-690S, TS-870S,
TS-940S,TS-950S. In the new version there will be more Kenwood radios supported."
Kenwood TS-570D RCP-2 software
Download Kenwood's free radio
control software* for the TS-570 HF.
KMIJ Kenwood Remote Control for TS-850/TS-450
Windows radio control software for
the Kenwood TS-850S and TS-450S HF Rigs. Originally released as shareware,
there is a version that is now Freeware, with free registration upon request.
Link700
Link700 is a program that will
allow users of Kenwood TH-D7A, E, and AG and TM-D700A and E to download all the
data settings of their radio, edit and modify data, upload the data, and save
settings to a disk file.
Marine Radio Control
32-bit radio control program for
the ICOM M700PRO, M710 and M710-R NMEA computer interface.
Micro-G2b Rotor control
This program uses a Z-World
Micro-g2b board to control up to 4 rotors.
Monteria
International Commercial supplier
of HF, VHF and UHF signals analysis and receiver control hardware and software.
MR8100 Page
MR-8100 user's manual with PC
software supplement.
POC32
POCSAG POCSAG Protocol Decoder,
Monitor for Windows 95/98 and Windows NT 4.0.
Pro-92 control
Program for dumpimg Pro92 scanner
memory into PC.
QRG_DB1
QRG_DB is a database for the Palm
OS computer to control a Yaesu FT-817 Transceiver via the CAT interface.
R2Pepper
ICOM R2 controlling program.
Radio Manager for Windows
Control Program for several
Scanning Radios. Icoms, AOR8000, AOR2700, OptoScan456/535, Radio Shack Pro-64/2041,
Opto Scout & Xplorer, & More!
RadioCommander 2052
Radio control program for windows
by kd5lmy.
RemIcom-B
RemIcom-B is a very simple ICOM remote
program.
Repeater Controler Program
A program to control a repeater
using an old computer and printer port.
RPU-8
Software for control radioscanners
AR300, AR5000, Icom PCR-1000, Winradio``simultaneously can work before 8
scanners Scanning mode/window.
RxPlus
A full featured Receiver
Controller for TenTec Rx320 with Audio Processor, digital modes decoder, ILG
DataBase Manager and much more. Support for Kenwood R5000, ICOM IC-R75, JRC
NRD535, Drake R8A/B.
Scan Manager
Windows-Based HF Scanning,
Logging, SWL, and Radio Control Software from KC4ZGL HAM Software.
Scan505
Freeware scanner program for the
Kachina DSP505.
ScanNow for AR8000
ScanNow is a computer scanner control
program for AR8000.
SOFT990
SOFT990 is a freeware designed for
the transceiver YAESU FT-990. Running also with FT-840 FT-890 FT-900 FT-920
FT1000MP FT-1000D.
SWL Manager
SWL Manager 2.0 is designed to
assist the Short Wave Listener determine which countries are broadcasting
English Speaking Programs, including the Time and Frequencies they're on.
TalkPcr & BackPcr
TalkPcr, a Win95/98 programme to
talk to your PCR1000, and BackPCR a Dos utility to backup your PCR1000 Eeprom
data by Pete Mahy, G4NIS.
Ten-Tec RX-320 Control program
The program GNRX320 is intended to
operate the Ten-Tec RX-320 receiver.
TH-D7 control program
This software allows you to
control TH-D7 radio functions in real time, using a windows interface. This
software will graph current activity of any 4mhz range, allowing the user to
mouse click any active portion - automatically changing the radios frequency.
TK120
open source software designed for
the Yaesu VR-120 receiver.
TK150
tk150 is open source,
multi-platform cloning software for the Standard (Yaesu) VR-150 portable
receiver.
TK500
Open source software designed for
the Yaesu VR-500 receiver.
TK545
Open source software designed to
control and program the Japan Radio Co. NRD-545 receiver.
TK75
Open source software designed to
control and program the ICOM IC-R75 receiver.
TK8500
open source software designed to
control and program the ICOM IC-R8500 receiver.
Trident TR-4000
Program for PC control of the
Trident TR-4000 / Camnis HSC-150 handheld radio scanner.
TRX-Manager HAM Radio CAT Software
TRX-Manager allows control of most
radios on the market and features many original features. By Laurent Labourie
F6DEX.
VisualRadio
Interactive Webradio Software
under Windows for most receivers/transceivers available today.
VR5000 Tool
VR5000 is an easy to use Tool for
the YAESU VR5000 Receiver.
Yaesu Ft100 Cat program
Cat program for Yaesu Ft
817/857/897/847.
Yeasu VR-5000 Control and log
Control and logging software for
yeasu VR-5000.