After you have completed LILO installation, the installation program will reboot your system. Don't forget to remove any diskette that might be in the diskette drive (Unless you decided to skip the standard LILO installation, in which case you'll need to use the boot diskette created during the installation).
After your computer's normal power-up sequence has completed, you should see LILO's standard prompt, which is boot:. At the boot: prompt, you can do any of the following things:
Do whatever is appropriate to boot Red Hat Linux. You should see one or more screens worth of messages scroll by. Eventually, you should see a login: prompt.
Congratulations! Your Red Hat Linux installation is complete! If you're not sure what to do next, turn to Chapter 6.