THE PA3CEG 23 cM GS35b PA PARTS

All parts where made with my own construction facility's at home, almost in brass and copper.

23cM-GS35-anC.JPG
23cM-GS35-anC.JPG
23cM-GS35-anC1.JPG
23cM-GS35-anC1.JPG
23cM-GS35-anC2.JPG
23cM-GS35-anC2.JPG
23cM-GS35-anC3.JPG
23cM-GS35-anC3.JPG
23cM-GS35-anC4.JPG
23cM-GS35-anC4.JPG
23cM-GS35-fail.JPG
23cM-GS35-fail.JPG
23cM-GS35-cav.JPG
23cM-GS35-cav.JPG
23cM-GS35-raw.JPG
23cM-GS35-raw.JPG
23cM-GS35airflow.JPG
23cM-GS35airflow.JPG
23cM-GS35-cool.JPG
23cM-GS35-cool.JPG
23cM-GS35-cool1.JPG
23cM-GS35-cool1.JPG
23cM-GS35-cool3.JPG
23cM-GS35-cool3.JPG
23cM-GS35-cool4.JPG
23cM-GS35-cool4.JPG
23cM-GS35-cool5.JPG
23cM-GS35-cool5.JPG
23cM-GS35-cool6.JPG
23cM-GS35-cool6.JPG
The anode water cooler is made  from a destroyed air cooler, witch has decide to travel around in my workshop, after a attempt to minimize the dimensions on the lathe machine. It's happens if you are in a hurry and forgot to put the turning center to the part where you working on.    
Page:   1  2  3 

[ Prev ]      [ Next ]

Back to the 23 cM  GS35 Project Page