## apcupsd.conf v1.0 ##
#
# "apcupsd" POSIX config file
#
# CONTROL <string>
CONTROL /sbin/powersc
#
# UPSCABLE [ simple | smart | 940-00(20B,23A,24B,24C,24G,95A,95C) | ether ]
UPSCABLE simple
#
# UPSTYPE [ backups | sharebasic | netups |
#           backupspro | smartvsups |
#           newbackupspro | backupspropnp |
#           smartups | matrixups | sharesmart ]
#
UPSTYPE backups
#
# UPSCLASS [ standalone | shareslave | sharemaster | netslave | netmaster ]
UPSCLASS standalone
#
# UPSMODE [ disable | share | net | sharenet ]
UPSMODE disable
#
#DEVICE <string> /dev/<serial port>
DEVICE /dev/ttyS1
#
#LOCKFILE <path to lockfile>
LOCKFILE /var/lock
#
#ACCESS <string> [ true | false ] Enable Access Support
ACCESS true
#
# ANNOY <int> <30> <0> disables
ANNOY 30
#
# DELAY <int> <60> <0> disables
DELAY 60
#
# NOLOGON <string> [ disable | timeout | percent | minutes | always ]
NOLOGON disable
#
# PROCFS <int> <120> <0> disables <update rate procfs-type of current status>
PROCFS 0
#
# LOGGING <int> <500> <0> disables <rate update log file of current status>
LOGGING 0
#
# TIMEOUT <time is seconds to run on UPS, powerfails>
TIMEOUT 0
#
# BATTERYLEVEL <precent of battery charge for shutdown> 10
BATTERYLEVEL 10
#
# MINUTES <time in minutes of remainning battery charge before shutdown> 5
MINUTES 5
#
# SENSITIVITY <char> H,M,L default H
SENSITIVITY H
#
# WAKEUP <int> 0,60,180,300 Cycles default 0
WAKEUP 60
#
# SLEEP <int> 20,180,300,600 Cycles default 20
SLEEP 20
#
# LOTRANSFER <int> 0,1,2,3 default 2
LOTRANSFER 2
#
# HITRANSFER <int> 0,1,2,3 default 2
HITRANSFER 3
#
# RETURNCHARGE <int> 0,1,2,3 default 3
RETURNCHARGE 1
#
# BEEPSTATE <char> 0,T,L,N default 0
BEEPSTATE L
#
# SELFTEST <string> 336,168,ON,OFF default 336
SELFTEST 336
#
# UPSNAME <string>
UPSNAME UPS_IDEN
#
# BATTCMD <string>
#BATTCMD
#
# TIMECMD <string>
#TIMECMD 
#
# LOADCMD <string>
#LOADCMD 
#
# LIMITCMD <string>
#LIMITCMD
#
# PWRCMD <string>
#PWRCMD
#
# RETCMD <string>
#RETCMD
#
# REMOTECMD <string>
#REMOTECMD
#
# REBOOTCMD <string>
#REBOOTCMD
#
# NETTIME <int>
#NETTIME 100
#
# NETPORT <int>
#NETPORT 6666
#
# MASTER <string>
#MASTER
#
# SLAVE <string>
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#SLAVE
#
# USERMAGIC <string>
#USERMAGIC
#
# HTTPACCESS [ true | false ]   enable web-interface - defaults to false
HTTPACCESS false
#
# HTTPPORT <port>  port to use for interface - defaults to 1999
#HTTPPORT 1999
#