Ham Equipment for Sale: antennas, rigs, masts, tower:
All this equipment is from my shack or my father's shack (except for the Telrex Tower). We are doing a little consolidation and getting ready to move so these items are for sale.
Call for details:
Ed Erny NZ1Q
978 369 2279
NZ1Q@arrl.net
| Item | Make/Model | Specs | Asking Price (shipping extra) |
| HF Rig |
Icom 761 |
ssb, cw, fm, am, 160m-10m, built in
auto ant tuner and power supply. Works well, clean, non-smoking. Has
extra CW filters for 500Hz bandwidth. Rig has memory channels, PBT (Pass
Band Tuning). Few small scratches on left and right sides. Not used
much in recent years since I also have an Icom 781 (also for sale -
look for my other add or click my web link below). Have original box,
manual, and extra shop manual. Will ship if necessary (buyer pays shipping). |
$475 |
| HF Rig |
Icom 781, s/n 01434
|
ssb, cw, fm, 160m-10m, very good cosmetic condition [internal antenna tuner not working]. The 781 x-mits full power. I keep the tuner switched out and have been using a resonant antenna or antenna tuner. Otherwise, it is in very good condition, nothing else wrong, very clean, non-smoking, CRT is not burned-in at all, you can just hear the fan (variable speed blower). | sold |
| Rotor | Yaesu rotor G-1000DX A (variable speed). Very good condition. | Heavy duty rotor - specs, manual, gen info | sold |
| Tower, 80 foot |
Universal Aluminum 80' tower with all hardware [disassembled]. Easy to install (base plate for ground mounting, guy anchors, set of guys at top). |
Design is tapered sections built for 90' (90 foot specs), includes, rotor plate, guys, anchors, base, all hardware [can be transported in a pickup truck]. 8 sections available for 80' tapered top or 70' w/top plate. Pick up only. | $900 |
| Log periodic array, 10 elements, all bands 20m - 10m | Tennadyne T-10 [original round boom design, sturdier than square boom] This is one of the original style T-10's with the sturdier round booms. The long element boom ends also have the upgraded double wall boom for added strength for any kind of ice storm. If I was putting up another tower and wanted to work all bands, I would choose this antenna again. | Disassembled, 24 foot boom, all hardware
included. Pick up only. There are no issues with the antenna. All hardware
is included. I have used this ant for about 10 years and it has worked
perfectly - for me this is an outstanding antenna for all band usage.
I was also able to load it on 30m with a tuner and successfully work
DX (some sort of compromised dipole equivalent).
Element to boom connections are tight. The elements are bolted through
the element to the boom. I never had any problems with them. This is
a sturdy mechanical coupling and makes good electrical contact. I do
have the balun you see in the pictures with some 20-30 feet of coax
ending in a typical coax connector, also included. The T-10 has been
used without any matching since the impedance is very near 50 ohms across
the frequency range from my experience. I always fed it directly without
any matching at either end of the 50 ohm coax.
The antenna is dissembled. That is, the boom is apart at the centers, about 12 ft 3 in in length each boom section, there are 4 of those sections since it is a double boom construction. The elements are removed from the boom, but left assembled. The longest elements are 19 ft 2 inches. For transport I would tie all pieces to a roof rack and I think that would be ok. |
$300 |
| 40m 2 element beam | Cushcraft 40-2CD | Dissembled into approx. 20 foot sections (boom and elements), all hardware and coax wound balun included. Pick up only. | sold |
| Roof tripod 5' | Tripod plus mast. Pick up only. | $20 | |
| Power Supply | home brew with meters | 12v, 20 amp | $50 |
| HF AMP | Heathkit SB-220 | 80m - 10m, 2kw, 110 or 220volts AC [updates & mods] | sold |
| Mast 4' | steel | galvanized, straight. Pick up only. | $10 |
| Mast, 10' | T-6061 Alu, 2" with 1/4 inch thick wall | 10 ft x 2 1/4 inch, with 1/4 inch wall. Straight, clean. Pick up only. | $25 |
| Mast, 15' | Steel, 2" dia | part of tower and antennas above. Pick up only. | sold |
| Tower, Telrex crank up (motorized) | Telrex 20' to 80' motorized | Contact Rich Mullen 978-394-3590 Concord, MA . Ant 4 el 20m, 5 el 15m available. | call Rich N1CRC for prices |