Setup (Advanced) → RF (IP)


At the time of manufacture, each Paragon3 and Gemini G3 is provided with a unique MAC address for its Ethernet and RF interfaces. These addresses cannot be changed. The RF interface is also provided with a unique Factory RF IP address. If this IP address conflicts with any existing IP network, it can be overridden.

RF MAC

RF Interface MAC address in HEX format (factory-set).

RF IP address

Displays factory-assigned address: nnn.nnn.nnn.nnn "Factory".

Entering 0.0.0.0 sets the RF IP Address to the factory default and highlights the "Factory" name (active address)

Entering nnn.nnn.nnn.nnn (RF IP Address of your choice) overrides the factory default and highlights the "Override" name (active address).

RF Net Mask

Set to valid common IP netmask for all units within a GeminiG3 network.

RF MTU

RF Interface MTU - Default 1242. - For optimal performance, set to 1242.

Entering a value lower than 1242 may reduce system performance. Flexibility of using other values may be useful in testing or for particular operational conditions.

Range is 576 to 1500.

Back to Top