2.1.1.12 Commit button (marker #12 of image 2.1.1)
The commit button when depressed will load the current screen settings into memory for use by
the servo controllers. Until the commit button is depressed all screen values are simply holding
areas and can be changed without affecting current breathing patterns. If the system is running a
profile, depressing commit will automatically load the current screen profile settings and upon the
next complete cycle the new settings will become the active running profile. If the unit in not
running a profile the screen values will load but they can be altered by depressing commit with
new screen values, these new values will replace the current values with the latest committed
values and if the �RUN� button is depressed these values will become the active profile.