Portable Relay

Kpc3+ V8.02 digipeater settings:
start with factory defaults and interface terminal

BEACON every 30                (or, your preferred beacon rate)
BTEXT !ddmm.mmN/dddmm.mmWoPHG2210/ YARS EOC  (or, your preferred text)
               |         |   ||||_Direction 0 for Omni
               |         |   |||__Antenna Gain
               |         |   ||___Antenna height as log2(HAAT/10)
               |         |   |____Power as the SQRT of P
               |         |________Icon Symbol (o=EOC)
               |__________________Symbol table

CMSG DISC                      (will not allow connections)
CTEXT Do not connect!          (or your preferred comment)
HID off                        (Turn off auto station ID)
Monitor off
MYCALL N3xxx-x                 (use preferred call and SSID)
MYREMOTE N3xxx-x               (use preferred call and SSID)
RTEXT My secret password       (This is the password for remote access)
UIDIGI ON RELAY                (Callsign substitution relay digi)
UNPROTO APRS via KE3XY-3,WIDE  (used for beacon path)
PBBS 0                         (Disable mailbox; tnc will reset)

To change settings connect to MYREMOTE from another radio and tnc.
Ex. C N3xxx-x
Enter code  (see Kantronics manual; remote access)
Change settings as though you were connected to a terminal.
To disconnect, enter Ctrl-C, then d (enter) at command prompt.